KNOW YOUR
FLOOR.

Epoxy flooring combines resin and hardener to create a seamless, durable surface bonded to prepared concrete. It can be installed in solid, flake, or decorative finishes.

A coating system is a complete stack of compatible materials—typically a prepared concrete surface, base coat, optional decorative flake, and protective topcoat—chosen for the space and expected use.

Concrete paint mainly dries on the surface. A properly installed two-part coating chemically cures and bonds to mechanically prepared concrete, delivering much greater strength and wear resistance.

Garage floors, workshops, basements, patios, utility rooms, showrooms, warehouses, and many commercial spaces may be good candidates. The slab condition and exposure determine the best system.

Preparation removes weak surface material and contaminants while creating the profile a coating needs to bond. It is one of the biggest factors in long-term performance.

Mechanical grinding is commonly used to open the concrete surface and create a consistent profile. The exact preparation method depends on the slab, previous coatings, and selected system.

Many non-moving cracks, pits, and minor surface defects can be repaired during preparation. Active movement or moisture-related damage may require a different recommendation after inspection.

Timing depends on square footage, repairs, coating layers, site conditions, and the selected materials. We provide a project-specific schedule before work begins.

Foot-traffic and vehicle-return times vary by coating system, temperature, and humidity. We give you exact cure guidance for your installation and recommend waiting for the stated window.

Yes. The floor and nearby lower wall areas need clear access for preparation, repairs, coating, and cleanup. We explain what to move and when it can safely return.

A professional coating over properly prepared concrete can withstand regular vehicle traffic, abrasion, spills, and daily use. Longevity depends on the system, environment, and maintenance.

Any smooth surface can become slippery when wet. Texture, decorative flake, and traction additives can be selected to balance cleanability, appearance, and grip.

Professional-grade systems are selected for vehicle use and resistance to hot-tire pickup. Strong adhesion still depends on correct surface preparation and full cure before parking.

Many systems resist common automotive fluids, household chemicals, and staining better than bare concrete. Spills should still be cleaned promptly, and resistance varies by material.

UV exposure can affect some coating chemistries. For areas receiving sunlight, we can recommend a UV-stable topcoat or system designed to better retain color and clarity.

Moisture vapor moving through concrete can interfere with adhesion. The slab and site conditions should be evaluated so the preparation and coating system fit the risk.

Remove loose grit with a soft broom or dust mop, then clean with water and a mild, coating-safe cleaner. Avoid harsh products unless your care instructions specifically approve them.

Some coated surfaces can be gently pressure-washed, but excessive pressure or aggressive nozzles may damage edges or the finish. Follow the care guidance for your specific system.

Localized chips or damage can often be repaired, though exact color and texture matching may vary with age and wear. Early attention usually makes repair simpler.

Consider lighting, wall and cabinet colors, dust visibility, contrast, and how the space is used. Start in our Color Studio, then confirm your choice with a physical sample.